top of page

18 BAY FLOOTLIT DRIVING RANGE

OPENING TIMES: 8AM-9PM 7 DAYS A WEEK

NO NEED TO BOOK

CONTACTLESS PAYMENT

CONTACT: JAMIE 07502 275797 DAVE: 07776 806879

PRICES:
30 BALLS    £3
60 BALLS    £4
100 BALLS  £5

Groups Feed

View groups and posts below.


This post is from a suggested group

Anushka Hande
Anushka Hande

Innovation and Sustainability Drive a New Era for Lens Solutions

The market is now embracing cleaner, smarter formats. Manufacturers are developing biocompatible and eco-conscious solutions free from harsh preservatives, appealing to users prone to irritation or allergic sensitivity. Early formulations now boast advanced disinfection systems—such as UV or time-activated tech—and packaging innovations like travel-friendly single-dose formats and smart reminders.

A VIEW FULL REPORT ACCESS AT : https://www.marketresearchfuture.com/reports/contact-lens-solution-market-21390

This innovation aligns with consumer demands for sustainability. Trends favor packaging made from renewable materials and formulas tailored for children's lens care or orthokeratology (overnight corrective) users, pushing customization and eco-awareness further into the spotlight.


23 Views

This post is from a suggested group

Anushka Hande
Anushka Hande

Market Momentum Driven by Electronics, Packaging, and Safety Regulations — with Sustainability and Waterborne Chemistry

The strongest demand drivers are electronics (chip and PCB assembly), precision packaging (protecting sensitive parts in transit), and regulated environments where ESD control is mandatory for product safety and insurance compliance. Increasing automation and higher component density on boards exacerbate sensitivity to ESD, raising the bar for surface protection at every touchpoint.

At the same time, buyers and regulators push toward lower-VOC, waterborne formulations and non-hazardous chemistries. Innovations in aqueous dispersions and polymeric conductive networks make long-life antistatic films possible without heavy solvent use — a major selling point for cleanroom and consumer-facing applications.

A VIEW FULL REPORT ACCESS AT : https://www.marketresearchfuture.com/reports/antistatic-coatings-market-12115 


Other notable market tailwinds include growth in photovoltaic panels and solar glass (where antistatic/dust-repellent surface treatments improve output), and pharmaceutical and medical device packaging where static can harm dosing accuracy or sterility. As these end-markets expand, demand for reliable, certifiable antistatic systems grows in parallel. 


8 Views

This post is from a suggested group

Anushka Hande
Anushka Hande

Versatility Across Sectors: Lightweight Strength Enables Diverse Architectural, Agricultural, and Industrial Uses

The versatility of corrugated polycarbonate panels makes them an attractive choice across industries. Lightweight yet highly impact resistant, these panels withstand hail, hailstorms, and other physical stresses better than glass—making them compelling for greenhouses, canopies, and outdoor structures.


A VIEW FULL REPORT ACCESS AT : https://www.marketresearchfuture.com/reports/corrugated-polycarbonate-panels-market-20292

The ease of handling and installation also contributes to lower labor costs and faster project completion times. Polycarbonate retains its clarity and structural integrity even after years of exposure, unlike age-brittle alternatives.

User experiences confirm this resilience. Greenhouse owners report that corrugated polycarbonate panels reflect sunlight gently, boost indoor light, and maintain durability—for many years, even under wind and rain.

3 Views

This post is from a suggested group

Anushka Hande
Anushka Hande

High‑Performance and Mixed-Use Concrete Admixtures Unlock New Capabilities in Infrastructure, Repairs, and Specialty Bui

Concrete admixtures are integral to delivering tailored solutions across infrastructure, repairs, and performance-critical applications. In infrastructure, admixtures support rapid-setting, shrinkage control, and freeze-thaw durability, helping structures endure harsh climates and accelerating completion timelines.


For repair and retrofit work, specialized formulations support waterproof overlays, crack-sealing grouts, and corrosion-inhibitor-integrated mixes—all crucial for extending the lifespan of existing assets without extensive downtime. When it comes to specialty projects—like marine structures or decorative architectural finishes—admixtures that offer color retention, permeability control, or malleable castability are driving innovation.


As architects and contractors demand form, function, and longevity, admixtures are becoming indispensable tools—blending strength, precision, and adaptability across a wide range of performance environments.

A VIEW FULL REPORT ACCESS AT : https://www.marketresearchfuture.com/reports/concrete-admixtures-market-1994

12 Views

This post is from a suggested group

Anushka Hande
Anushka Hande

Smart and Sustainable Fencing Solutions Elevate Market Expectations Toward Connected, Eco-Conscious Design

Fencing is now as much about intelligence and environmental sensitivity as it is about enclosure. Smart fencing systems—incorporating sensors, surveillance, and remote access controls—are gaining traction, especially in residential and commercial sectors focused on convenience and safety. These technologies enhance surveillance capability and blur the line between traditional fencing and modern security architecture.


A VIEW FULL REPORT ACCESS AT : https://www.marketresearchfuture.com/reports/fencing-market-7388


Sustainability is also driving innovation. Demand for eco-friendly fencing solutions—made from recycled plastics, composite blends, or responsibly sourced timber—is growing among conscious consumers. Regulatory frameworks and green building standards increasingly favor fences that not only reduce environmental impact but also deliver long-term resilience.

9 Views

This post is from a suggested group

Anushka Hande
Anushka Hande

Innovative Pathways and Sustainability Goals Reshape the Adipic Acid Landscape

As environmental concerns amplify, the adipic acid market is evolving beyond its traditional petrochemical roots. Conventional production methods are facing scrutiny due to greenhouse gas emissions—particularly nitrous oxide—and industry leaders are exploring cleaner routes including bio-based fermentation and greener oxidation technologies.


Notably, development of adipic acid from renewable feedstocks such as corn, sugarcane, and lignocellulosic biomass aligns with global decarbonization aims. These emerging bioprocesses promise lower environmental impact and scalable alternatives to traditional production.


Alongside innovation, there's a growing emphasis on applications that support energy efficiency—such as polyurethane foams for building insulation, and nylon components contributing to lightweight vehicle design. These uses reflect adipic acid’s evolving role as a tool for sustainability, not just performance.


A VIEW FULL REPORT ACCESS AT : https://www.marketresearchfuture.com/reports/adipic-acid-market-5479

3 Views

This post is from a suggested group

Anushka Hande
Anushka Hande

Electronics, Renewable Energy, and Advanced Industrial Uses Propel Fluoropolymer Adoption

Fluoropolymers are becoming indispensable in sectors where precision and reliability are non-negotiable. In semiconductor and electronics manufacturing, their purity and chemical resilience ensure pristine production environments and high-performance components. As global investment in chip and data infrastructure rises, so does the demand for fluoropolymers that can maintain integrity under stringent conditions.

A VIEW FULL REPORT ACCESS AT : https://www.marketresearchfuture.com/reports/fluoropolymers-market-3226


The renewable energy sector also benefits from fluoropolymers: photovoltaic systems and battery technologies often deploy advanced fluorinated resins that offer resistance to UV degradation, moisture, and electrical stress. Their inclusion enhances both energy capture and system longevity.


In industrial processing, fluoropolymers are frequently used in gaskets, seals, and protective linings where exposure to aggressive chemicals and extreme temperatures is routine. These materials ensure operational integrity while reducing downtime and maintenance disruptions. Their versatility continues to expand into sectors as varied as pharmaceuticals, wires and cables, and even architectural solutions.

1 View

This post is from a suggested group

Anushka Hande
Anushka Hande

High-Performance Coalescing Agents Reshape Markets in Automotive, Adhesives, and Personal Care

The coalescing agent landscape is diversifying as formulations extend beyond paints and coatings into sectors such as automotive, adhesives, inks, and personal care. In automotive coatings, agents that ensure fine, crack-free finishes at low application temperatures support both performance demands and low-emission production practices. These high-efficiency agents enable smoother, more resilient surfaces that maintain gloss and durability under stress.


Similarly, in adhesives and inks, coalescing agents enhance film formation and bonding, delivering consistent texture and functionality. This is particularly critical when surfaces experience mechanical stresses or environmental fluctuation. In personal care, coalescing agents fulfill a different but equally critical role—stabilizing textures in creams, lotions, and applicators to produce smooth sensory experiences without reliance on harsh solvents or additives.


With diverse end-use sectors moving toward cleaner, more efficient formulations, these tailored coalescing agents are gaining prominence—fueling formulation flexibility and enabling manufacturers to meet varied performance demands in evolving product landscapes.

A…

1 View

This post is from a suggested group

Anushka Hande
Anushka Hande

Hydrogen and Hybrid Solutions Propel Fuel Cell Generators into New Energy Architectures

The evolution of fuel cell generators is intertwining with hydrogen production and hybrid energy configurations, creating resilient and adaptive power ecosystems. Hydrogen—when sustainably produced—transforms fuel cells into truly zero-emission systems, reinforcing decarbonization goals across industrial, remote, and urban applications.


Innovators are marrying fuel cell systems with renewable energy assets like solar and wind, using excess generation to produce hydrogen via electrolyzers. This model creates two powerful functions: storage for renewables and clean power on demand—bolstering grid flexibility and renewable integration.

A VIEW FULL REPORT ACCESS AT : https://www.marketresearchfuture.com/reports/fuel-cell-generator-market-23611


Meanwhile, modular fuel cell designs support flexible deployment—from mobile backup to scalable decentralized systems. Pairing these with AI analytics enables remote monitoring, predictive maintenance, and adaptive operation that enhances efficiency and lifespan.


The synergy between hydrogen infrastructure, smart systems, and hybrid energy design is redefining fuel cell generators as central to energy transition strategies and next-gen power architectures.

1 View

St Cleres Colf Centre

London Road

Stanford Le Hope

Essex

SS17 8PZ

  • Instagram
  • Facebook
  • Twitter
bottom of page